Wednesday, June 4, 2008

Hacking The Cisco 7940 IP Phone

Or How To Change The Ringtone And Idle Logo On The Cisco 7940G IP Phone


Quick-Links

  1. Pre-requisites
  2. Setup a TFTP server
  3. Configure the phone to use your TFTP server
  4. Get the phone configuration data
  5. Modify the configuration files
  6. Create a new logo
  7. Create a new ringtone
  8. Update the phone
  9. Notes and troubleshooting
  10. Samples
  11. Resources
  I want to point out right at the start that this is what I've put together after gleaning information from various sources on the Internet. I don't really know what I'm doing!

I was sitting around doing nothing at work yesterday and I started fiddling with my desk phone, a Cisco 7940 IP Phone. I changed the ringtone and reached the Network Configuration menu. I noticed the phone's IP and just for the heck of it, tried to open it up in the browser. Surprise! It shows a lot of the details of the phone and its network settings.

I then realized that there was more to the device than it would appear and I Google'd around for some hacks. The first few things I came across were that it was possible to load your own ringtones and change the idle logo.

  Before you make any changes, make sure you note down the original value/ setting! You don't want to be calling your Help-Desk and explaining to them what you were doing!

You can save almost all the relevant information by going to http://[your-phone-ip-address] in your browser and choosing the Network Configuration link. You should see a page that looks like:

You can save/ print this page for future reference and roll-backs. To get your phones IP address, check under Settings > Network Configuration on the phone.

Pre-requisites

You're going to need the following things for this:
  1. A Cisco IP Phone - I've got the 7940 model but from what I can tell, these steps should work on other similar ones also.
  2. A TFTP server - I used the free TFTP server from SolarWinds
  3. A web server - This applies only if you want to change the logo.
  4. A utility to convert images to CIP - Again, this applies only if you want to change the logo. And if you don't want to be coding the required files by hand!
      Cisco provides an SDK that includes these but you need to register on the site ( and you might need to enter contract details, which might not be possible if the phone is at your workplace ). I wasn't able to complete the registration, kept getting session timeout errors so, I'm not sure how/ if this works.
     


    I used the free utilities by Mark Palmer that can be downloaded from http://search.cpan.org/~mrpalmer/Cisco-IPPhone-0.05
  5. An image editor that supports GIFs and resizing - Again, you'll only need this to create logos. I used Adobe Photoshop but any decent editor should server you well.
  6. An audio editor that supports creation of RAW audio files - This only applies if you want to be able to create ringtones. I used the trial version of GoldWave; it’ll let you perform 150 commands in a session and up to 2000 commands after which the trial version will expire.

Setup a TFTP server

  TFTP is NOT the same as FTP! The servers/clients are not interchangeable!

Your OS probably has a built-in TFTP client ( try typing tftp at the console ) but you'll need a server.

The phone uses TFTP to pick up its configuration files when it boots. Usually this is some server that the IT department in your company maintains but you can easily modify the phone's settings to use your private TFTP server instead.

The SolarWinds TFTP server is really simple to use. Simply install and run the application. Choose File > Configure. Modify the options as you see fit. Do note down the TFTP Server Root Directory ( C:\TFTP-Root by default ). Don't forget to start the service!

  The SolarWinds TFTP server automatically logs all the requests it gets. If you're using some other server, see if you can/ need to increase the logging level, at least initially, to get a list of files required.
 

That's it; your TFTP server is now running. You can check it with the command line TFTP client that Windows XP and Mac OS X have ( I don't know about Linux but I'm sure it must! ). Go to the command line and type in tftp. On Windows XP, you'll get the following:

C:\>tftp

Transfers files to and from a remote computer running the TFTP service.

TFTP [-i] host [GET | PUT] source [destination]

-i              Specifies binary image transfer mode (also called
octet). In binary image mode the file is moved
literally, byte by byte. Use this mode when
transferring binary files.
host            Specifies the local or remote host.
GET             Transfers the file destination on the remote host to
the file source on the local host.
PUT             Transfers the file source on the local host to
the file destination on the remote host.
source          Specifies the file to transfer.
destination     Specifies where to transfer the file.


C:\>

On the Mac, you'll simply get the TFTP prompt: tftp>

The command is not very hard to figure out so I'll leave out part explaining how to use it.

Configure the phone to use your TFTP server

Now that you have a TFTP server running you need to point the phone to it. Do the following:
  1. On the phone, go to the settings menu and select Network Configuration. The options are not editable by default so you need to key in the secret password, **#. You should see the tiny lock icon at the top unlock.
  2. A long way down in the list of options ( option #32 on my phone ), you'll find the option for Alternate TFTP. You need to set this to YES so that you can change the actual TFTP server address.
  3. Go back up to the top of the list ( irritating? Yes, I know! But you can key in the option number to speed things up. ) to reach the option for TFTP Server 1. Edit this, type in the IP to your machine and Validate.

  Note down the original TFTP server IP address before you modify it!
  • Once you choose to Save, the phone will reboot. It will now try to get the configuration files from your TFTP server. In the TFTP server logs, you should see the requests for various files, collate the file names into a handy list.

  • Get the phone configuration data

    As noted above, your TFTP server should be logging all the requests from the phone. This will give you a list of configuration and resource files required by the phone.

    You should now use the original TFTP server ( you did note down the IP address didn't you? ) to get all these files ( use the command line TFTP client built-in to your OS ). Then copy them into your TFTP server root so that your phone can pick them up from there instead. Simple, huh?

    Modify the configuration files

    You'll find some XML files in the collateral that you download from the original TFTP server. One of these would be named something like SEP0123456789AB.cnf.xml. This name comes from the host name of your phone ( SEP0123456789AB in this case ) which itself is derived from the MAC address of the phone ( 01-23-45-67-89-AB ). This is the main configuration file.

    Open it in any text editor and look for the tag <idleURL>. This points to the place where the 'screensaver' graphics are picked up.

    The graphics displayed on the phone are not your usual image files but instead a special XML. You can see how to create the required XML file below. For now, you need to know that you will need to host this XML on a web server on your machine so that the phone can pick it up from there. You can also leave it as it is, the phone will then continue to use the original logo that it had.

      Make sure that your web server uses the mime-type text/xml when serving XML!

    I spent almost half an hour trying to debug why an XML hosted on Tomcat was not being used for the logo when I could see the phone hitting the correct URL and getting the correct response from the server.

    It hit me later that it was probably a mime-type mismatch and I then tried IIS. Voila! That worked! I then checked the responses of each server using the Live HTTP Headers plugin for Firefox and saw the difference in content-type.

    Create a new logo

      I'd suggest downloading the original XML that the <idleURL> tag was pointing to and putting that on your web server at first. This will help rule out malformed or unsupported images while troubleshooting. Once you get everything setup, you can replace this with your custom file.

    The logo is usually in the CIP ( Cisco IP Phone Image document ) format which is an XML file with some specific tags and the image data in hex. You can use the gif2cip application to convert a GIF image into the required XML. The Cisco 7940 IP Phone uses images that are a max of 133 pixels wide by 65 pixels tall. You can find out more about your particular phone model by checking out the Cisco site for appropriate documentation.

    The logos seem to come out better if they have minimum gradients, sharp boundaries and fewer colours. You might have to give this quite a few tries to get acceptable results.

    Get an image you like, use an image editor to resize it within the supported boundary limits and then save it as a GIF. Use the gif2cip application to convert this to a CIP document. If you have Photoshop, you can also use the plugin to save it directly as a .CIP file. If you open the document in a text editor, you'll see the XML tag for <Prompt>. This is the text that is displayed on the phone when the screensaver is on. Modify it as you see fit.

    You can now put up this XML on your web server, ready to be requested by the phone.

      The phone requests the logo XML every time the screensaver comes on! This means you could serve this images dynamically to some purpose like random images or whatever else you can think of.

    Create a new ringtone


    The ringtones supported by the phone must conform to certain strict requirements. I'm not very clear on these.

    All I did was use GoldWave to snip out parts of an MP3 and save as a Raw (*.snd) file with the attributes you can see in the image. These worked for me but the length of the tone is pretty short. I'll try out some more options to see if it can be longer but I doubt it.

    The ringtones are listed in a file named RINGLIST.XML ( you should have got this from the original TFTP server and it should be available in your TFTP server root directory ). It has entries of the form

    <Ring>
        <DisplayName>Are You There 1</DisplayName>
        <FileName>AreYouThere.raw</FileName>
    </Ring>
    

    You'll need to add your new ringtone in similar elements. The display name is what the phone shows in its UI. The filename is the name of the ringtone you created ( change the extension to raw if it isn't already ).Save the changes you've made to the file.

      If you want to be able to use the ring tones that were available on your phone by default, you will need to get those from the TFTP server as well. The RINGLIST.XML entries will tell you the names of the ringtones and you should put them in your TFTP server root directory along with the rest of the files.

    Update the phone

    Now that you've got all your stuff ready and made all necessary configuration changes, you're ready to try it out!

    The phone picks up configuration files only when it's booting. So you can either unplug then replug it or use **#** while in the Network Configuration menu.

    You should see your TFTP server logging requests for various files, just like before. Only this time, it actually has those files and can serve them up to the phone! Once it's done booting, you should see the logo come up after the default idle timeout ( you can change this too; check the SEP0123456789AB.cnf.xml we modified earlier for <idleTimeout> ).

    If you followed my suggestion earlier and used your original XML, you should now replace it with your custom file and refresh the screensaver ( you don't need to restart the phone, you can either select Update or just perform some action, like picking up the handset and putting it back; that interrupts the screensaver and then starts it again ). If everything has been setup correctly, you should see the image you want!

    Your ringtone should be listed under Settings > Ring Type > Default Ring. When you choose to Play the file, you should see a request on your TFTP server, for the corresponding .raw audio file. If it's too big or not in the correct format, you'll see errors. If it's acceptable, you'll hear your ringtone play.

    Notes and troubleshooting

    Like I mentioned earlier, I got this to work on the Cisco 7940 IP Phone specifically, using instructions and information from various sources. So I'm not sure how this applies to other models. However, the following checklist should help you locate the problem:

      Verify that your TFTP server is working properly by trying to fetch a file using a client other than the phone.
     

      Verify that the changes you made to the TFTP server IP address on your phone have indeed been saved.
     

      Verify that your server is not logging any failed file transfers. If it is, you may have forgotten to get some files from the original TFTP server or you mustn't have placed them in the current TFTP server's root directory.
     

      Verify that you've modified the <idleURL> tag to point to the correct location of the logo.
     

      Verify that the changed URL for the logo is seen in the settings on the phone, to make sure it's picking up the correct configuration.
     

      Verify that you can fetch the required logo XML from your web server by using a browser to hit the URL. Also verify the content-type being returned by the server; my phone required it to be text/xml.
     

      Once you try to load your ringtone, you should see a request for the *.raw audio file getting logged by the TFTP server. Verify that it's the correct filename.
     

      If the phone displays an error, try to make the ringtone again. The requirements are pretty strict and you may need to snip quite a bit of the audio to be able to load the file onto the phone.
     

    Samples

    You can try out some of these sample logos and ringtones that I'd made; they're working for me and could be a starting point for you in case you don't have immediate access to the required tools. Save the files and host them on your server.

      Linking directly to these graphics files will probably not work:
    • I'm not sure if the phone would pick up something off of the Internet
    • Your admin would have proabably restricted access to the Internet from the phone
    • The mime-type these servers respond with may not be what the phone expects

    Graphics:
    The Batman Logo
    The Unreal Logo

    Ringtones:
    The opening notes of the M:I-2 theme
    Moby's In My Heart, from the Nokia ad.

    You can also get the ringtone of the [Cisco IP] phones from the TV show 24 from here. In case the page is down, you can get the files it linked to from here, here and here.

    If you create something that you think others might like, please let me know, I'll link to it in the list above.

    Resources

    27 comments:

    Anonymous said...

    You can also use the free TFTP Server from PacketTrap. You can get it at www.PacketTrap.com/download. I find it more intuitive and faster than the solarwinds product.

    Anonymous said...

    hi, thank you for this great information

    regards,
    Meki Chan
    Cisco Trick

    Sam Hall (aka Capt. Egg) said...

    I'm trying to find out if there is a way to dial a number on this phone from your PC. Did you ever look into this?

    I don't think it's possible, but if it is that would be very handy.

    Anonymous said...

    Get the IP of the phone. Telnet into it. Default password is lowercase "cisco". From there you can access commands enabling you to dial and so on. Cant recall what they are exactly but if you type a ? you get a listing of available commands. You can play the "hang up" game with your co workers too, which is amusing for about 5 mins. Remote into their phone, and hang up their calls. Its hell funny.

    Anonymous said...

    You can push xml-documents to the phone to make it call out etc. See

    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/6_0/english/programming/guide/xsi60obj.html#wp1033829

    no.good.at.coding said...

    @Sam Hall: No, sorry, I didn't try that.

    @shockboi: My phone has telnet disabled; probably by our company sysadmin. But that's a cool trick :)

    @Anonymous: I'm not sure; doesn't it require the user to select the option?

    Anonymous said...

    You can jump to the relevant menu options by typing the number (ie 3 4 to get to Item 34)

    You can probably re-enable telnet by changing one of the config files that's pulled by tftp ;-)

    Thanks for the place to start

    Cheers
    Andy

    no.good.at.coding said...

    @andy: You certainly can jump to the options but I didn't want to complicate the write-up further. And also, I wanted to avoid a situation where Cisco decided to add/remove some options and thus, changed the order in the menu! That would render the steps useless to someone who didn't quite understand what to do.

    I did try re-enabling telnet using the config files, but that didn't work. If you find something, do let me know!Here's the Cisco page for the file parameters: http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_sip_security_application_guide/SIPSecAp.html

    And I"m glad it helped you in some way :)

    Anonymous said...

    The Cisco document you link to in regards to the format of the soundfile implies that the sound file can only be ~2 seconds in length (16080 samples / 8000 samples per second = 2.01).

    I have successfully loaded a ringtone that is over three seconds in length. That limitation may be dependant upon your phone model/firmware version.

    My phone is a 7940 with firmware version 8.0(10.0).

    The bullet points about the number of samples being evenly divisible by 240 bears some explanation. If your ringtone isn't divisible by 240, you'll hear a click at the end of playback. The same goes for the file ending at the zero crossing.

    To overcome these problems, I edit my sound files in audacity (http://audacity.sourceforge.net/download/) and use the Generate->Silence... menu option and pad the ending (and beginning, as needed) with silence. This satisfies the requirement that the file begins and ends at the zero crossing. Otherwise, you get clicks at the beginning or end of playback.

    I then trim the file down to a reasonable length (if the sound is really short, like < 1 sec., my phone tries to play it twice per ring. That sounded annoying with the 1-UP sound from Mario 3, so I added extra padding at the end to stretch it out) and save it as a .wav file.

    The next steps are borrowed from another blog which I cannot locate at the moment:

    I use the SOX command-line audio editor (http://sox.sourceforge.net/) to convert the file from .wav to U-Law.

    The command-line looks like this:

    sox sound.wav -t raw -r 8000 -U -b -c 1 sound.raw resample -ql

    Then I use the dd command (http://gnuwin32.sourceforge.net/packages/coreutils.htm for you poor Windows users) to trim the file such that the filesize is divisible by 240.

    Remembering that there are 8 bits per sample, the file size in bytes equals the number of samples. That means that we can divide the file size by 240 to see how many blocks of 240 bytes the final file should have.

    The dd command to create a file of exactly 16080 samples looks like this:

    dd if=sound.raw of=sound.trimmed.raw bs=24 count=67

    Thank you for a great and informative post!

    Anonymous said...

    Whoops... that dd command above should read:

    dd if=sound.raw of=sound.trimmed.raw bs=240 count=67

    Which means "read from sound.raw, write to sound.trimmed.raw 67 blocks of 240 bytes each"

    Anonymous said...

    That sox command only works on an older version of sox. The latest version (as is provided in the link) accecpts the following command:

    sox sound.wav -t raw -r 8000 -U -c 1 sound.raw rate -l

    Daniel Q said...

    hello, May be you can help me. I bought a 7940 in ebay, and it is like in a hung state showing Protocol Application Invalid.
    I can see the phone trying to download the files from the tftp server, the issue is that I don't have these files.
    Cisco requires a maintenance contract to download the conf files. Do you know where I can get those files?

    no.good.at.coding said...

    Hi Daniel,

    I'm really sorry about not replying earlier, I've been busy with grad school.

    I'm not sure about where to get these files since I was trying stuff out on my desk phone at work and I had access to the TFTP server.

    I'd suggest VoIP-Info.org, a Wiki where people who are interested in 'all things VoIP' collaborate. You will probably find someone who can help you out there. The page for the Cisco IP Phones is here

    Anonymous said...

    I have managed to successfully upload and play a ringtone that was 8.25 secs long. It seems that the only issue is the size of the file compared to available memory on the selected phone. Perhaps.
    64.5kb file worked, 66.5kb did not.

    This is all on a Cisco 7940
    Model: CP-7940G
    Firmware: 8.0(9.0)

    Alternate TFTP server program, as suggested by the Cisco Site
    http://tftpd32.jounin.net/tftpd32_faq.html

    Anonymous said...

    A bit late here, but does anyone know which config file/setting carries the equivalent of the "Disable Settings Access" checkbox that is available in the Cisco Call Manager? I would assume the value would have to be sent to the phone to work, but I just don't see anything appropriate in the files I can pull from tftp. We would like to lock down the ringtone setting after customizing it, but do not have access to the call manager.

    -thanks

    Cross side scripting tutorial said...

    Mm.. Look nice . But unfortunately i don't know what is cisco mobile.

    Anonymous said...

    Will altering the TFTP server in the phone have any negative consequences operationally? Not going to touch policy... lol

    Will this require the tftp server to be running constantly for the ringtone to work? Will it error our otherwise?

    Also, what happens when my pc is off and it can't contact the tftp, will it default to a ringtone?

    Thanks!

    Anonymous said...

    My phone says it can't get the ringlist but I see it logging a request and see it successfully downloading... Would you have any ideas?

    vinny said...

    hi all,
    few questions here.

    1. will this hack work on a cisco 7945 model phone?

    2. After I configure the phone TFTP to my IP address and I start the TFTP on my computer, I see it connecting to my phone, but then it says "transmission failed. Cannot find file C:\...."

    What am I doing wrong? Any suggestions?

    Unknown said...

    Hey, I tried following this guide just for the custom ringtones. I followed everything correctly until this step:

    "Go back up to the top of the list ( irritating? Yes, I know! But you can key in the option number to speed things up. ) to reach the option for TFTP Server 1. Edit this, type in the IP to your machine and Validate."

    2 things. First, at the just mentioned step, what IP address do I enter in "TFTP Server 1"? I assume it would be the IP address of my own TFTP server we just started up. But how do I found out what the IP Address is of my Solarwinds TFTP? In any case, the phone doesn't connect to my TFTP server and it logs nothing, so I don't have access to the ringlist.

    Second, the option "Alternate TFTP" was already put as "YES" on my phone. Is that maybe a problem?

    Hopefully you can answer these questions for me.

    Sincerely yours,

    Nairel Walter

    slim shady said...

    Can anyone let me know if i have my service with VonageBusiness and i just need to have a softphone which works with IP Phone which can help us saving time dialing number through click to call. send me an email on harshal.bhuta@gmail.com

    slim shady said...

    Just to update that its a SIP based phone. Without any call manager in house.

    Anonymous said...

    Awesome post! It took some trial and error, but I was able to modify ringtones, the background image, and the screensaver image on my Cisco 7911G. I also found (as noted by a previous poster) ringtones only seem to be limited by file size. I got a 12 second ringtone loaded without a problem. Also found that you can just use Audacity to create the raw file. Put together your sound clip that you want, change it to mono if it is stereo, change the Project Rate to 8000 Hz (bottom left corner of the window) and then export the file. When exporting choose "Other uncompressed files" for filetype, and then click the "options" button below that. Set "Header" to RAW and "Encoding" to U-Law. This might be easier for some people than the sox/dd method.

    As for the images, I did not need to convert them at all to the weird cisco phone format, I simply saved them as PNGs (2 bit color) and they worked fine. You can change the image displayed in the top right box of the phone in Settings -> User Preferences -> Background Images. I had to edit a file called "List.xml" in the directory "Desktops/95x34x1/" in my tftp root directory. Lots of fun! Thanks again!

    Anonymous said...

    Great info, ihave found more info on this website http://voip.media2000.org, this have more and more Cisco Phone Info.

    Safi said...

    this helpful info with us. Please keep us up to date like this. Thanks for sharing. Zong Internet Package

    vanduchiyama said...

    Tinc's Tinc's Titanium's tarnish is still on display at the
    Tinc's Tincs tinc's titanium jewelry for piercings titanium tarnish is black titanium fallout 76 still on display at the The Game Museum titanium gravel bike on titanium engagement rings October 21st, 2018. The titanium vs tungsten Tinc's Tinc Tincs Tinc

    Anonymous said...

    j035t3cxbpz696 dog dildo,Clitoral Vibrators,horse dildo,wolf dildo,wolf dildo,dog dildos,masturbators,glass dildo,vibrators s089t9qwqrk526